Kids Body Temperature Watch

Measure your body temperature in 35 seconds! Our kids body temperature watch comes with Time & Temperature modes - simply toggle the modes by tapping on the circle icon at the bottom of the watch face. It has IP67 water resistant rating, but don't go swimming with the watch! Easy to clean thanks to the silicon wrist band - just pop out the watch face, and the band can be cleaned with a damp cloth.

To charge:
1. Remove the watch face from the strap – simply twist the silicon band, and the watch face can be popped out.
2. Connect the provided USB cable, and make sure that the 2 charging points are connected well.
3. Plug into your USB charger. A blinking dash at the top left corner will indicate that it is charging. When it is fully charged, it will stop blinking.
 
To set the time:

1. Toggle to the Time mode by tapping the circle button on the bottom.
2. Tap and hold the button to enter setting mode. Hold for approximately 10 seconds, until the numbers start blinking.
3. Lightly tap the button to change the number. To select, tap and hold for approximately 10 seconds, until the minutes numbers start blinking.
4. Lightly tap the button to change the number. To select, tap and hold for approximately 10 seconds, until the numbers stop blinking.
5. The time is set.

 
To take the temperature:

1. Toggle to the Temperature mode by tapping the circle button on the bottom.
2. The little c will start blinking. This indicates that it is reading the temperature. Make sure that the back of the watch face is firmly on your wrist.
3. After approximately 35 seconds, the little c will stop blinking.
4. The number on the screen is the temperature.